How do I log in to my router via

The most frequently asked question is, “How do I log in to my router?” Logging in to your Router can be somewhat of a hassle as not everybody is a tech-savvy person. There may be numerous reasons as to why you might not be able to login into your router, IP address issues being the most common ones. By default, the IP address or of the routers is either provided or you have to search for it yourself.

Most of the time, the gadget or computer that you’re using will pick up the router’s IP address itself, but if the device is using a static IP address, then you will have to configure the IP address by yourself to retrieve it in order to use your internet. Here at, we help you configure every router with the least amount of hassle and we will explain each step to configure your router so that you can login into your router and start using it without any trouble while using it to its maximum potential.

What is

We here at make sure that people around the world are facing no problem in logging in to their routers. We explain all the necessary steps in logging in to the routers and finding the IP addresses so that people can log in to their routers. We also help in troubleshooting all the steps required in setting up a router and answer all the FAQ’s related to the router problems around the clock.

Starting with your Netgear Router

Netgear is one of the foremost and well-known companies in making the best quality routers in the market be it for home, business use or streaming and gaming. Netgear Routers usually have two default login IP addresses, which are or and different routers might pick up either of these two IP addresses. But Netgear went one step further and made it very easy for people to use their routers and log in to them. They now ship their routers configured to use either or instead of the IP addresses previously mentioned. This makes it easier for its users to remember the login URL’s rather than the IP addresses. Once you enter either of the URL’s, the device will automatically take you to the router login page where you have to put in your username and password. The username is “admin” and the default password is “password”. It can be changed later if needed.

To login to your Netgear router, follow these steps:

  1. Open a web browser on the device and type either or in the address bar. Make sure you’re on the right login page which asks for the username and password.
  2. Put in the username and password in the dialogue box. If the username or password has been previously changed, the default username and password will not be recognized.  

        Username: username

        Password: password

       (Note: If either of the username or password has been changed, put that in instead of the default username and password.)

  1. The Home screen of your router’s web page will open.

If you’re still unable to establish a connection, then you will be redirected to the Netgear’s Technical page. An alternate method can also be applied which is using your router with a wired Ethernet connection as wired connections are the best way to access the router. If everything else fails, try resetting your router.

How do I reset my router?

If by any chance you’ve forgotten your username or password, you can opt to reset your router through the following steps. Make sure your router is on before proceeding with the reset.

(Note: If you choose to reset your router, you’re personalized username and password will also get reset.)

A router is an independent
network device with local IP or and its operating system based on UNIX. To configure it, either a telnet interface or a web interface is used. The Telnet interface is the router’s command console-a more complex device configuration interface. For less experienced users, there is a simplified version – a web interface, which is often called a “personal cabinet”. It is available at – it must be entered in the browser – Internet Explorer, Chrome, Opera or Firefox.

To clarify whether the device is used this A & P can be on the label on the bottom or back of it. In the same place, the login with the password is usually specified – admin / admin. If you do not have access to the router by, check whether you have an IP address on the Ethernet or Wi-Fi network adapter. You can get access to your router by entering at the address bar.

EX3700 Wi-Fi Range Extender (AC750)

Another low-cost Wi-Fi extender that plugs directly into a wall socket is the NETGEAR EX3700. It’s dual-band and compatible with Wireless-AC technology.

EX6200 Wi-Fi Range Extender

If you need a Wi-Fi Extender, the NETGEAR EX6200 is the best option for most situations. It is a powerful dual-band extender that’s both versatile and affordable.

RE6500 Wi-Fi Range Extender

If you’re willing to spend a bit more for a bit more coverage area and a few extra security features, the Linksys RE6500 may be a better choice.

To reset your netgear router:

  1. Locate the reset button on the back of the router. It might be towards the inside labeled “Reset”.
  2. Using a small paper clip or anything similar, press and hold the reset button for about seven seconds.
  3. Release the button after seven seconds and wait for your router to reboot. Once you’re router finishes rebooting, a light will start to flash. The power light will then turn solid green.

Your router has been successfully restored to its default settings. You can now log in to your router using or with the procedure mentioned above.  

How do I locate the IP address?

The default IP address of Netgear routers is either or, the device that is being used, when connected to the router will automatically retrieve the IP address for you but sometimes due to some reasons or your devices might be using a static IP address, then the IP addresses are not available. In that case, you can search for them yourself through the following easy steps:

To locate the IP address:

  1. Launch a web browser through your device which is connected to the router.
  2. Type either or in the address bar. The default web page containing the login window will display.
  3. Enter the default router name and password. The username and password are case sensitive. A Basic Homepage will display.
  4. Select ADVANCED. The IP address will display the Router Information.

To change the Router name (SSID) and password

You can change the Netgear router Network name (SSID) and the password later if you like. It is advised to change it after once logging in the router network so as to prevent unwanted connections that might steal your data or other important information. It is also advised not to distribute the customized password to too many people as it might cause congestion.

To change the Router username and password:

  1. Launch any web browser and type in either or into the address bar.
  2. Enter the last used username and password when prompted. Click OK.
  3. Select WIRELESS.
  4. Enter the new desired username in the Name (SSID) field.
  5. Enter the new desired password in the Password field.
  6. Click Apply button. Your changes will be saved.

Netgear has made it really easy and hassle-free for its users to set up the routers themselves with ease of access and a user-friendly login interface. Simply put, its users can now just dial and the home page will display itself instead of putting in various IP addresses specific to the routers.

How you can implement

On the off chance that you have bought a Netgear switch, you should go to and it will you to get to your router’s IP address for simple access to the administrator arrangement interface. Beforehand we trusted this was executed through DNS forwarder insider the switch reacts with its IP for accessing In any case we found that easily resolve the routers IP address notwithstanding when the unit is set  just as an entrance point, working in a system with a different switch/outside DNS server. This might appear to suggest that it could seize DNS to notwithstanding when this is just an entrance point.

error: Content is protected !!